Evo 10 wheels are 18 x 8.5 inches from the factory on every US car: Enkei cast-alloy on the GSR and BBS forged-alloy on the MR, with 245/40R18 Yokohama ADVAN tires. The bolt pattern is 5x114.3 and the center bore is 67.1 mm. Nothing smaller than an 18-inch wheel clears the factory Brembo brakes.

Evo 10 wheels: factory Enkei and BBS specs, and what fits
Evo 10 wheels explained: the factory 18 x 8.5 Enkei and BBS wheels, bolt pattern, offset and center bore, and the sizes that fit.
A 2015 Lancer Evolution Final Edition on its dark-finish Enkei wheels. Photo: Bring a Trailer listing by Bulletmotorsportsinc
At a glance
Evo X stock wheels by trim
Mitsubishi's 2008 release describes the Evo X stock wheels in one sentence: 18 x 8.5-inch wheels, "Enkei cast-alloy on GSR and BBS forged-alloy on MR," carrying 245/40R18 Yokohama ADVAN asymmetrical performance tires. The Evo IX before it ran 17 x 8-inch wheels with 235/45R17 tires.

| Trim | Factory wheel | Size | Tire |
|---|---|---|---|
| GSR | Enkei cast alloy | 18 x 8.5 | 245/40R18 |
| MR and MR Touring | BBS forged alloy | 18 x 8.5 | 245/40R18 |
| 2015 Final Edition | Enkei, dark finish | 18 inch | 245/40R18 |
The Evo X Enkei wheels are a 12-spoke design. Wikipedia's trim list describes them as "Enkei 12-spoke high-rigidity cast alloy wheels," with BBS lightweight alloy wheels as the option in Japan. The Final Edition of 2015, based on the GSR, kept Enkei wheels in a darker finish.
The Evo X BBS wheels came with the MR's other hardware, the Bilstein shocks, Eibach springs and two-piece front rotors. They are forged rather than cast. Mitsubishi never published a weight for either wheel in its US press material, so any weight quoted online comes from an owner's scale.
One car left the factory on something smaller. The Japanese-market RS, a stripped model never sold in the US, is listed with 16-inch wheels.
Evo X wheel specs
The Evo X wheel specs below matter when shopping for a replacement set. The size and tire come from Mitsubishi. The bolt pattern, thread, bore, torque and offset come from ThreePiece's fitment guide for the Evo X and the ordinary Lancer of the same generation, and Wheel-Sizes lists the same bolt pattern and center bore.
| Spec | Evo X factory figure |
|---|---|
| Evo X rim size | 18 x 8.5 inches |
| Offset | +38 |
| Bolt pattern | 5x114.3 |
| Center bore | 67.1 mm |
| Lug thread | M12 x 1.5 |
| Lug torque | 80 ft lbs |
| Tire | 245/40R18 |
The Evo X OEM wheels fit the hub exactly. Wheel-Sizes notes that stock Lancer Evolution wheels have a perfect center bore fit with the hub, which is why an aftermarket wheel with a larger bore needs hub-centric rings.
Wheels for Evo X: what fits
The brakes set the lower limit. The Evo X has 13.8-inch front rotors and 13.0-inch rear rotors, with four-piston Brembo calipers in front and two-piston calipers in the rear. ThreePiece puts it plainly: the smallest wheel that fits the factory Brembos is 18 inches, the factory size.
When picking wheels for Evo X fitment, ThreePiece's guide recommends 18 or 19 inches in diameter, 9.5 to 10.5 inches wide, with offsets from +15 to +40. It calls the factory 18 x 8.5 +38 setup tucked by comparison, which is why an Evo X with rims from the aftermarket usually sits wider than stock.
Spoke shape matters as much as diameter. Two wheels of the same size and offset can differ in how much room the spokes leave for the front caliper, so brake clearance has to be checked for the specific wheel.
Weight at the wheel was part of the factory design. Mitsubishi says forged aluminum suspension components reduce unsprung weight, and the MR's two-piece front rotors are 2.9 lb lighter per wheel than the one-piece rotors on the GSR. The front and rear track is 60.8 inches, 1.2 inches wider than the Evo IX, which is the room a wider wheel has to work within.
Evo X wheel spacers and wheel bearings
Evo X wheel spacers are the usual fix when a wheel does not clear the caliper. ThreePiece's example is an 18 x 9.5 +22 wheel on a 2012 MR that needed a 3 mm spacer for adequate brake clearance. The guide's advice for a wheel known not to clear is a slip-on or hub-centric spacer.
A spacer changes the working offset. A 3 mm spacer on a +22 wheel gives an effective +19, as the guide notes, so the spacer has to be counted when checking fender clearance.
The Evo X wheel bearing is the part behind all of this, pressed into the hub the wheel bolts to. Mitsubishi's press material gives no figures for it, and none are given here.
The Evo X steering wheel
Searches for Evo 10 wheels often mean the one inside the car. The Evo X steering wheel is leather-wrapped on every US trim, according to the 2008 press kit. The MR adds audio controls on the wheel and the magnesium shift paddles for the TC-SST twin-clutch gearbox. The GSR, a five-speed manual, has no paddles.
Where to go next
- Evo X cars for sale lists the cars on the market now, stock wheels and otherwise.
- The Evo X page has the specs and the production table.
- Evo values shows what every generation sells for.
- The Final Edition article covers the last cars and their dark Enkei wheels.
Sources and photo credits (8)
- Mitsubishi Motors North America, 2008 Lancer Evolution release
- Mitsubishi Motors North America, 2008 Lancer Evolution press kit
- ThreePiece, Evo X and Lancer wheel fitment guide
- Wheel-Sizes, Mitsubishi Lancer Evolution wheel size and specs
- Wikipedia, Mitsubishi Lancer Evolution X
- Cover photo: 341-Mile 2015 Mitsubishi Lancer Evolution Final Edition 5-Speed, Bring a Trailer listing by Bulletmotorsportsinc (photo DSC04624-99424)
- Photo 1: 25k-Mile 2008 Mitsubishi Lancer Evolution X MR, Bring a Trailer listing by Bridgewater_Acura (photo DSC09828-81591)
- Articles page image: an illustration made with ChatGPT, not a photograph

Register your Evo
Claim your VIN or chassis number. Your car gets a page with its photos, its ownership chapters and every sale on record.
Register your EvoPhoto: Bring a Trailer listing by p1_motorcars_ltd
Comments
Members can correct a mistake in this article or add to it here.
Log in or sign up free to comment.