The Mitsubishi 4G63 engine is the 2.0-liter turbocharged inline four behind every Lancer Evolution from the I of 1992 to the IX of 2006. The X replaced it with an all-new engine, the 4B11.

4G63 specs

The 4G63 is the 2.0-liter member of Mitsubishi's Sirius engine family, the 4G6 series. It displaces 1,997 cc from an 85 mm bore and an 88 mm stroke. It has a cast-iron block and an aluminum cylinder head, and the Evolution engines have two overhead camshafts and four valves per cylinder. Mitsubishi first sold a turbocharged 4G63 in the 1980 Lancer EX 2000 Turbo. The twin-cam version arrived in the Japanese-market Galant in 1987.

Before the Evolution

The twin-cam turbo 4G63 went into the 1988 to 1992 Galant VR-4 and into the US-market Eclipse from 1990 to 1999, so the engine was on sale in the United States for more than a decade before the first Evolution.

4G63 horsepower in the Evo

The Evolution I made 250 PS in Japanese form. Output rose with each early generation: 260 PS in the II and 270 PS in the III. For the IV, Mitsubishi turned the engine 180 degrees in the car and fitted a twin-scroll turbocharger, for 280 PS.

The first US car, the 2003 Evolution VIII, was rated at 271 hp. For the 2006 Evolution IX, Mitsubishi added MIVEC variable valve timing and revised the turbocharger, for 286 hp at 6,500 rpm and 289 lb-ft of torque at 3,500 rpm. That MIVEC engine in the IX was the last version of the 4G63.

4B11 vs 4G63: what changed

Mitsubishi's release for the 2008 Evolution X lists what the new 4B11 did differently:

  • A cast-aluminum block in place of the 4G63's cast iron, with an aluminum cylinder head, head cover and timing chain case.
  • No balancer shaft.
  • A timing chain in place of the belt.
  • A direct-acting valvetrain in place of roller rocker arms.
  • MIVEC on both camshafts. The last 4G63 had it on the intake only.
  • The exhaust manifold moved to the firewall side.

The 4B11 made 291 hp at 6,500 rpm and 300 lb-ft at 4,400 rpm, against the IX's 286 hp and 289 lb-ft.

Building or rebuilding a 4G63? Post it in Builds with the parts list and the dyno sheet.